The ZeroWater 12-Cup Ready Pour Pitcher, unlike any other leading water filter jug, utilises a patented 5-stage Ion Exchange Filtration system, removing virtually all dissolved solids from your water. Featuring a one-handed, pull-and-pour button spout, this filter jug makes pouring from the fridge or filling bottles simple. Using ReadyPour™ technology you can pour already filtered water whilst water which hasn’t yet been filtered remains safely sealed in the reservoir, allowing you to add 2 more cups to the already large jug capacity of 10.
Simply twist the filter into the bottom of the reservoir until there is a complete seal between the filter, O-ring and reservoir, fill the reservoir with cold tap water and place the lid on top, allowing the water to pass through before re-filling. Store in or outside your refrigerator depending on your water temperature preference to enjoy the safest, purest-tasting water.
ZeroWater’s patented 5-Stage Ion Exchange Filtration system can remove 99% of all Fluoride and other inorganics, such as nitrates. Additionally, IAPMO certification proves the filter reduces PFOA/PFOS (“forever chemicals”), Lead, Chromium and Mercury, rest assured your water is of the highest quality. Your water will first pass through a coarse filter screen to remove any suspended solids such as rust and dirt that make your water appear cloudy, and then a foam distributor will remove any additional suspended solids. Next, a multi-layer activated carbon and oxidation reduction alloy will remove organic contaminants such as Mercury, Chlorine, Chloramine, pesticides and herbicides while stopping bacteria from growing. The Dual Comprehensive Ion Exchange Resin will then remove inorganic compounds such as metals, non-metals and even radiological contaminants. Finally, an ultra-fine screen and non-woven membrane layers will remove any remaining solids.
It is not uncommon for UK tap water to contain TDS (Total Dissolved Solids) between 100-500 PPM. You can rest assured your water quality is pristine with the included laboratory-grade water quality metre. After passing through ZeroWater’s patented 5-Stage Ion Exchange Filtration system the metre will deliver a reading of “000” PPM (Parts Per Million) leaving you confident in the quality of your drinking water. Please note that it is normal for this reading to increase as the filtration system ages while still filtering your water to impeccable levels of cleanliness. Once the TDS meter reads “006” or above, replace your filter to ensure you are maintaining high-quality water filtration.
*Certified to NSF/ANSI standards 42 and 53. Issued 5/7/2021
ZeroWater Filter Performance Sheet
