Hurom H-AA Alpha 3rd Generation Slow Juicer in Red
Hurom H-AA Alpha Slow Juicer
Sporting an improved in design and fine tuned performance, the Hurom H-AA is at the current frontrunner in the world of vertical juicers. It contains Alpha Technology juicing components, which have been developed by Hurom to provide a smoother, and more efficient juicing experience than ever before.
Most major manufacturers have been slow in launching new models that improve on even Hurom's 2nd Generation models. So, we are very glad to see Hurom themselves leading the way with new pioneering technology in this 3rd Generation. In terms of capability the H-AA is amazing, especially when you compare it's features to its price, and its bonus accessories of a coarse screen and homogenising blank make it one of the most versatile vertical juicers to date.
- Slow 43 RPM motor with quiet operation
- Separate 17 RPM screen and spinning brush rotation
- Alpha juicing components
- Semi-transparent hopper
- Ergonomic design with utility based features
- Pulp discharge control lever
- Included accessories: 1 Coarse Screen, 1 Homogenising Blank, 1 Pulp Collection Container, 1 Juice Collection Container & 1 Cleaning Brush
- Easy to clean
- Simple to assemble
- BPA free materials
3rd Generation Improvements
With so many slow juicers on the market it can be tough to know the good from the bad. That's why we here at Juicers.co.uk only stock the best of the best, and when we got our hands on this juicer we had no doubt that it qualified. One thing we noticed right from the start was the slimmer and sleeker body of the H-AA compared to many other vertical juicers. This makes it lighter and much more comfortable to move. The H-AA also has some very noticeable upgrades to its juicing components, which include: an improved augur design, a revamped spinning brush and a new gearing system in the base of the juicing bowl. This new gearing system allows the spinning brush to rotate and an incredible 17 RPM which is much slower than the previous HH 11 2nd Generation juicer, which rotated at the same speed as the motor.
Efficient Augur Design
The new auger design removes the wings from the previous 2nd generation which allow for better and easier assembly of the juicer and also as the wings were quite thin on the edges it means it is also less likely to break if dropped. Apart from that, the new design we believe will allow for more efficient juicing of your fruit and vegetables which will result in a greater yield
Slow Spin Speeds
The new juicing screen and spinning brush design make the new Hurom H-AA Alpha 3rd Generation model easier to assemble and maintain however most of all it can extract more juice from the fruit and vegetables. We found that the wiper blades were more robust than the previous version as well as the wiper blades having grooves at the bottom which allows the new gearing system to work.
Streamlined Juicing Bowl
The new juicing bowl design is a marked improvement in several different ways, and we believe that the biggest improvement is the new gearing system which allows the wiper blades to rotate at just 17 RPM. This means that you get minimal foaming and also a well-mixed juice as a result. We also found that the juicer itself is more robust with fewer rubber parts and there is a cut-out where the pulp would come out which means that it makes it far easier to clean.
The Hurom H-AA is versatile, not only does it come with the Fine Screen but it now comes with 2 new attachments the Coarse Screen and the Homogenizing Screen or Sorbet Screen. This opens up the possibility to use your juicer for a wide variety of recipes. These include nut and soya milk, frozen sorbet, nut butter, hummus, smoothies as well as juices.
From our testing, we found it very easy to use and to clean. To get the highest possible yield with minimal cleaning, we advise that you chop the fruit and vegetable into small chunks which are about 2 inches in length and feed them in slowly. As soon as you see the pulp ejecting, then you feed in more. This will give you the best yield, driest pulp and also least amount of time cleaning the juicer.
Regarding cleaning, we advise at the end to keep the juicer running and poor in a glass of water with the juice cap closed and let the water build on in the juicing chamber. Then after 20 seconds drain and repeat. This will clean most of your juicer out, and then you simply rinse the parts in running water using the cleaning brush to clean the juicing screen.
The new Hurom H-AA Alpha 3rd Generation Juicer is a fantastic juicer and one which we believe is an improvement over the previous 2nd Generation HH 11 2G model. Not only will this improve the quality of juice that you will be getting but also the extra attachments such as the coarse screen and homogenising screen make it even more versatile than ever before.
- Model: H-AA
- Colours: Red, Silver & Black
- Dimensions LxWxH (mm): 233 x 180 x 407
- RPM: 43
- Power (Watts): 150
- Weight (kg): 4.8
- Warranty: 10 Years (Motor) 5 Years (Parts)
*Please note this model does not come with the juice container lid, hopper lid, small cleaning brush and chamber rack (drying stand)
Customers also viewed
Hurom H-AA Alpha 3rd Generation Slow Juicer in Black
Hurom H-AA Alpha 3rd Generation Slow Juicer in Silver
Hurom HZ Alpha 3rd Generation Slow Juicer in Stainless-Steel£499.00
Hurom H-AI Self-Feeding Juicer in Platinum Silver£499.00
Hurom HH 11 2nd Generation Slow Juicer in Red£399.00
Hurom H-AA Alpha Slow Juicer
Posted by Trevor on 17th Apr 2018
Truly amazing juicer. I am very impressed with the quality of the juices it makes, The Machine is easy to assemble and to clean, and Not too bulky, and juices vegtables with no fuss, i would highly Recomend this juicer 100%.
Love this juicer!
Posted by Unknown on 11th Jan 2018
I researched long and hard before choosing a 3rd generation Hurom slow juicer. It does everything I wanted and more. Very happy indeed!